Ready to turn your Harley Street Glide into a rolling concert? The Street Glide Tour Pack with Speakers adds crystal‑clear audio, rugged durability, and effortless control, all while keeping the bike’s classic look. We break down specs, installation steps, and real‑world performance so you can ride louder and smarter.
Key Takeaways
- All‑in‑one solution: The tour pack combines a high‑capacity battery, a powerful amp, and weather‑proof speakers.
- Easy installation: Most riders can mount the kit in under two hours with basic tools.
- Premium sound: Expect 70 W RMS output and clear mids, perfect for highway cruising.
- Smart controls: Bluetooth, USB, and a handlebar-mounted control panel keep you connected without taking your eyes off the road.
- Durability: Shock‑absorbing mounts and sealed enclosures protect the system from rain, dust, and vibration.
- Customization: Adjustable speaker angles and optional sub‑woofer upgrades let you tailor the audio to your taste.
- Value: Compared to aftermarket add‑ons, the factory‑designed tour pack offers better integration and resale value.
📑 Table of Contents
Why the Street Glide Needs a Tour Pack with Speakers
Riding a Harley Street Glide is already an experience—wind, open road, and that unmistakable rumble of the V‑twin engine. But imagine adding a soundtrack that moves with you, from classic rock to podcasts, without the hassle of external gear. That’s exactly what the Street Glide Tour Pack with Speakers delivers.
Harley‑Davidson designed the tour pack to be a seamless extension of the bike’s electrical system. It’s not an after‑thought accessory; it’s engineered to handle the bike’s voltage spikes, temperature extremes, and the constant vibration of long rides. In short, it lets you enjoy premium audio while keeping the bike’s iconic style intact.
What’s Inside the Tour Pack?
1. High‑Capacity Battery
The pack includes a 12 V, 18 Ah AGM (Absorbent Glass Mat) battery. AGM technology provides a steady power output, resists spills, and lasts longer than traditional lead‑acid batteries. This extra juice powers the speakers, amp, and any Bluetooth devices without draining the main bike battery.
Visual guide about Street Glide Tour Pack with Speakers
Image source: cyclesuk.com
2. Amplifier
A compact 70 W RMS Class D amplifier sits behind the battery. Class D amps are lightweight, efficient, and produce less heat—ideal for a motorcycle that already runs hot.
3. Speakers
Four 4‑inch weather‑sealed speakers are mounted on the left and right sides of the saddlebag. They deliver a balanced frequency response (80 Hz‑20 kHz) and are designed to handle the vibrations of a touring bike. Optional upgrades include a rear sub‑woofer for deeper bass.
4. Control Panel & Connectivity
The handlebar‑mounted control panel features volume, bass, treble, and source selection buttons. Bluetooth 5.0 allows wireless streaming from any smartphone, while a USB‑C port lets you plug in a flash drive or charge a device.
Installation: Step‑by‑Step Guide
Tools You’ll Need
- Phillips and flat‑head screwdrivers
- 7 mm socket set
- Electrical tape and zip ties
- Wire crimping tool
- Torque wrench (optional but recommended)
Step 1 – Prepare the Bike
Park the Street Glide on a stable stand. Disconnect the main battery to avoid any short circuits. Remove the existing saddlebag if you’re swapping it for the tour‑pack‑compatible version.
Visual guide about Street Glide Tour Pack with Speakers
Image source: thephoblographer.com
Step 2 – Mount the Battery
Slide the AGM battery into the designated compartment beneath the seat. Secure it with the two mounting bolts (tighten to 8 Nm). Make sure the terminals face forward for easy wiring.
Step 3 – Install the Amplifier
Place the amp in the same compartment, directly behind the battery. Use the supplied brackets and fasten with the provided bolts. Route the power wires so they don’t rub against moving parts.
Step 4 – Wire the System
- Connect the amp’s positive lead to the battery’s positive terminal using a ring terminal.
- Ground the amp to the bike’s chassis (a clean metal spot near the battery works).
- Run speaker wires from the amp to each speaker location. Keep the wires protected with zip ties.
- Attach the Bluetooth antenna (usually a short coaxial cable) near the handlebars for optimal signal.
Step 5 – Mount the Speakers
Secure each speaker into the pre‑drilled holes on the saddlebag brackets. Tighten the mounting screws to 5 Nm. Adjust the tilt angle so the drivers point slightly upward—this improves sound dispersion while riding.
Step 6 – Attach the Control Panel
Slide the control panel into its slot on the left handlebar. Snap it into place and verify that the buttons are reachable without removing your gloves.
Step 7 – Test and Re‑connect
Reconnect the main battery, turn the ignition on, and press the power button on the control panel. Pair your phone via Bluetooth, play a test track, and adjust volume, bass, and treble to taste. Once satisfied, re‑install the saddlebag and give everything a final tighten.
Performance in Real‑World Riding
Sound Quality on the Open Road
During highway cruising (55‑70 mph), the speakers maintain a clear mids‑range without distortion. Bass remains tight thanks to the built‑in crossover, which automatically filters frequencies below 80 Hz. Even at full volume, the system doesn’t draw excessive power, thanks to the efficient Class D amp and AGM battery.
Visual guide about Street Glide Tour Pack with Speakers
Image source: coeccc.net
Weather Resistance
All components are sealed to IP‑67 standards. Rain, dust, and even salt‑water spray from coastal rides won’t penetrate the enclosures. The speakers feature a rubber gasket that prevents moisture from entering the driver cone.
Battery Impact
With the bike idling, the tour pack draws about 1.2 A. On a typical 10‑hour ride, the AGM battery will still have roughly 30 % charge left, leaving enough power for the bike’s lights and electronics. If you frequently use the system, consider a quick‑charge charger to top off the AGM battery between trips.
Customizing Your Audio Experience
Adding a Sub‑Woofer
If you crave deeper bass, an optional 8‑inch sub‑woofer kit can be bolted into the rear rack. The amp includes a dedicated sub‑woofer output, and the control panel automatically switches to “Bass Boost” mode when a sub is detected.
Fine‑Tuning the EQ
The control panel’s three‑band EQ lets you adjust bass, mids, and treble in 2 dB increments. For highway riding, a slight boost (+2 dB) on mids helps vocals cut through wind noise. In city traffic, raising the treble (+2 dB) improves clarity of street‑level announcements.
Integrating With Other Harley Accessories
Many riders pair the tour pack with a Harley Tour Pack with Speakers that includes a GPS navigation module. The Bluetooth module can handle two simultaneous connections—so you can stream music while receiving turn‑by‑turn directions.
Maintenance and Troubleshooting
Regular Checks
- Inspect speaker mounts every 3 000 miles for looseness.
- Wipe the battery terminals with a dry cloth to prevent corrosion.
- Check the waterproof seals for cracks after heavy rain.
Common Issues
1. Intermittent Sound
Often caused by loose speaker wires. Re‑seat the connectors and secure with zip ties.
2. Bluetooth Dropouts
Make sure the antenna isn’t blocked by a bulky helmet or luggage. Relocating the antenna a few inches higher can improve range.
3. Low Volume at Full Power
This may indicate a weak AGM battery. Use a multimeter to check voltage; it should read above 12.5 V when the system is idle.
Is the Street Glide Tour Pack Worth It?
For riders who love long tours, the added convenience of on‑board audio outweighs the modest increase in weight (about 12 lb). The system’s integration keeps wiring tidy, and the factory‑grade components outlast many aftermarket kits. If you already own a Harley with a standard tour pack, upgrading to the version with speakers is a logical next step.
In comparison, many riders opt for portable Bluetooth speakers. While cheaper, they lack the durability, power, and seamless integration of the factory tour pack. In the long run, the Street Glide Tour Pack with Speakers offers better value and a more enjoyable riding experience.
Final Thoughts
The Street Glide Tour Pack with Speakers transforms a classic cruiser into a mobile music lounge. Its robust construction, easy installation, and high‑quality sound make it a top choice for touring enthusiasts. Whether you’re cruising the Pacific Coast Highway or navigating city streets, the system delivers reliable audio without compromising the bike’s iconic look. With a few simple steps, you can enjoy your favorite tracks, podcasts, or navigation prompts— all while staying connected and safe on the road.
Frequently Asked Questions
Can I install the tour pack myself, or do I need a professional?
Most owners can install the kit with basic tools in 1‑2 hours. Follow the step‑by‑step guide and double‑check all connections. If you’re uncomfortable with electrical work, a dealer can install it for a modest fee.
Will the speakers drain my bike’s main battery?
No. The dedicated AGM battery handles the audio load, drawing only about 1.2 A when active. Your main battery remains largely unaffected.
Is the system compatible with all Street Glide model years?
The tour pack is designed for 2015‑2023 Street Glide models. Earlier bikes may require minor mounting adaptations, but the electrical system is generally compatible.
How loud can the system get without distortion?
The amp delivers up to 70 W RMS. At full volume, you’ll get clear, distortion‑free sound in the 80 Hz‑20 kHz range, suitable for highway speeds.
Can I use the tour pack while wearing a helmet?
Yes. The control panel is positioned on the left handlebar within easy reach, and the Bluetooth connection works with most helmets.
What warranty does Harley‑Davidson provide?
Harley‑Davidson offers a 2‑year limited warranty on the tour pack components, covering defects in materials and workmanship.